Elektrikli Çit İzolatörleri
PP Pençeler İzolatörü INS609B 19.7g 6mm Poly Tel için Ahşap Post Elektrik Çit Izolatörleri
Product Overview The INS609B is a compact wood post claw insulator for conductors up to 6 mm. Made from tough PP/PE, it grips wire, poly wire and poly rope without letting them creep, and its light 19.7 g body suits fences that are strung, stripped and re-strung through the year. The slim claw ...
Pençe İzolatörü INS608B 30.2g Ahşap Direk Elektrikli Çit İzolatörleri 9mm Poli Tel İçin
Product Overview The INS608B is a wood post claw insulator sized for thicker conductors up to 9 mm. The claw wraps the wire so it cannot slip down the post, while the impact-resistant PE body takes the knocks of daily farm use. At 30.2 g it adds little load to timber posts even over long runs. Key ...
Offset Halka İzolatörü INS460B 45.3g M6X22CM Elektrikli Çit İzolatörleri Uzun Dişli Vida Direği İçin
Product Overview The INS460B long thread offset ring insulator holds a conductor well clear of the post with a total length of 275 mm. A 5.8 mm galvanized steel easy screw carries a 75 mm thread and the plastic head is 60 mm long, so the ring stays rigid under tension. Wire, poly wire and poly rope ...
Uzatma Dişli Halka İzolatör INS058B 150mm 40g Elektrikli Çit İzolatörleri 55mm Vidalı Direk İçin
Product Overview The INS058B long thread ring insulator gives a conductor a 150 mm offset from the post. Its 5.8 mm galvanized steel easy screw has a 55 mm thread, the plastic head is 50 mm long, and the 40 g PE body is impact resistant. Wire, poly wire and poly rope run free through the ring up to ...
Darbe Direnci Vidalanabilir Ofset İzolatör INS015B 68gr Elektrikli Çit İzolatörleri 25mm Vidanız İçin
Product Overview The INS015B is an impact resistant screw-in offset insulator that lifts wire, poly wire and rope clear of the post. A 6 mm galvanized steel screw with a shorter 25 mm thread holds the arm 220 mm out, and the 68 g PE body stays firm under tension. It is the shallow-thread version for ...
Vida Dişli Ofset İzolatör INS082B 62.5g Elektrikli Çit İzolatörleri 25mm Polytape 55mm Dişli Direk İçin
Product Overview The INS082B stands wire, poly wire and rope off a timber post and is built to carry wider poly tape as well. Its 6 mm galvanized steel screw has a 55 mm thread and holds the arm 220 mm out from the post, while the 62.5 g PE head takes tape around 20 to 25 mm and conductors up to 4 ...
K
Product Overview Built for timber post corners, the INS560B steers a broad fencing tape around the turn using two clips that keep it square. A 304 stainless fastener anchors it to the post, and the 147 g shell of HDPE and galvanized steel is made for long-term outdoor lines. The paired clips stop ...
Ahşap Post Teyp Köşe Izolatörü INS561B 147g 40mm Teyp Paslanmaz Bolt için Elektrik Çit Izolatörleri
Product Overview A tape corner fitting for timber posts, the INS561B takes one run of fencing tape and holds it against the post. The 304 stainless bolt does the fixing while a lone side clip keeps the tape level as it departs. Its 147 g shell mixes HDPE with galvanized steel so it keeps holding ...
HDPE Küçük Uç Gergi İzolatörü INS502B Sarı Elektrikli Çit İzolatörleri Köşe Direği 5mm Tel İçin
Product Overview The INS502*B is a small HDPE end strain insulator supplied in yellow for high visibility. It brings a 5 mm conductor through the fitting and holds wire, poly wire, poly rope and poly braid up to 6 mm, making it a compact anchor for the corner or end of a fence. The HDPE body is ...
